Differences

This shows you the differences between two versions of the page.

--- 9mm_luger [2016/06/08 05:46] – [Load types] ton
+++ 9mm_luger [2022/06/13 14:41] (current) – ton
@@ Line 11: / Line 11: @@
 |Overall length|29.69 mm (1.169 in)|
 \\
+==== Chrono data ====
-==== Load types ====
+\\
+|Date|Bullet|Powder|Primer|Data|
+|10-06-2022|Ares 147gn GBT|3.1gn VVN310|Ginex SPP|[[chronydata_10062022]]|
+==== My personal loads ====
 \\
 |**Powder**|**Weight**|**Bullit**|**Weight**|**Primer**|**OAL**|**Speed**|**Powerfactor**|**Testresults**|
+|VVN310|3.1Gn|Ares GBT|147Gn|Gynex SPP|29.1|N/A|N/A|Accurate, nice, cheap **FAVORITE**|
+|VVN320|3.4Gn|ALSAPRO|140Gn|Gynex SPP|28.9mm|N/A|N/A|Accurate, nice|
+|VVN310|3.8Gn|ALSAPRO|124Gn|S&B SPP|28,7mm|308m/s min|126 min|Accurate|
 |VVN310|3,8Gn|LOS RNCP|123Gn|Gynex SPP|28,3mm|313m/s min @ 3,7gn|min. 126 @ 3,7gn|Very accurate|
 |Bold BA9|5.5gn|Alsa RNFMJ|124Gn|Gynex spp|29.0mm|320m/s|130|Great load, stable grouping|
+|Bold BA9|5.0gn|Alsa RNFMJ|140Gn|Gynex spp|29.0mm|N/A|N/A|Good load|
 \\
+==== Powder settings ====
+\\
+|**Powder**|**Weight**|**Setting**|**Comment**|
+|VVN320|3.8gn|21.8mm|9mm 124gn load|
+|Lovex D032|4.2gn|20.25mm|9mm 124gn load MAX|
+|Lovex D036|6gn|20.25mm|9mm 124gn load MIN|
+|Lovex D036|6.5gn|22.2mm|9mm  115gn middle load|
+\\
+====Die settings====
+|Seating depth|Bullet|Stem measurement|Crimp dia|
+|29 mm AOL|ALSAPRO 124/140gn|12.96|9.65|
+|28 mm AOL|ALSAPRO 124/140gn|11.96|9.65|
 \\
-==== Running load ====
-In the HK USP Expert, the following goes extremely well:\\
-|**Powder**|**Weight**|**Bullit**|**Weight**|**Primer**|**OAL**|**Testresults**|
-|VVN310|3,8Gn|LOS RNCP|123Gn|Gynex SPP|28,3mm|Very accurate|
-|Bold BA9|5.5Gn|Alsa RNFMJ|124Gn|Gynex spp|29.0mm|Great load, stable grouping|
-**Edit:** 5.3Gn was too low for the USP so upped to 5.5Gn\\
 ==== Trial loads ====
+Trial loads:
+|**Powder**|**Weight**|**Bullet**|**Weight**|**Primer**|**OAL**|**Crimp**|**Test results**|
+|N310|2.9gn|Ares|147gn|Ginex|29.6mm|9.6mm|Not tested yet|
+|N310|3.0gn|Ares|147gn|Ginex|29.6mm|9.6mm|Not tested yet|
+|N310|3.1gn|Ares|147gn|Ginex|29.6mm|9.6mm|Not tested yet|
+|**Powder**|**Weight**|**Bullet**|**Weight**|**Primer**|**OAL**|**Crimp**|**Test results**|
+|Lovex D032|3.9gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Not accurate|
+|Lovex D032|4.0gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Accurate|
+|Lovex D032|4.1gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Accurate|
+|Lovex D032|4.2gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Very accurate|
+|Lovex D032|4.3gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Very accurate, much recoil|
+|**Powder**|**Weight**|**Bullet**|**Weight**|**Primer**|**OAL**|**Crimp**|**Test results**|
+|Lovex D036|6.0gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Not tested yet|
+|Lovex D036|6.2gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Not tested yet|
+|Lovex D036|6.4gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Not tested yet|
+|Lovex D036|6.6gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Not tested yet|
+|Lovex D036|6.8gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Not tested yet|
 Trial loads made to be tested:\\
 |**Powder**|**Weight**|**Bullet**|**Weight**|**Primer**|**OAL**|**Crimp**|**Test results**|
-|VVN310|3.0Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|5/5 no repeat|
+|Lovex D032|3.9gn|AlsaPro FMJ|124gn|Ginex|29.4mm|9.6mm|Redelijk accuraat, blijft niet open na laatste|
-|VVN310|3.1Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|5/5 no repeat|
+|Lovex D032|4.2gn|AlsaPro FMJ|124gn|Ginex|29.4mm|9.6mm|Accuraat, harde klappen, niet heel relaxed|
-|VVN310|3.2Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|4/5 no repeat|
+Volgens QuickLoad is 4gn PF129
-|VVN310|3.3Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|4/5 no repeat|
-|VVN310|3.4Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|3/5 no repeat|
+|Lovex D036|6.1gn|AlsaPro FMJ|124gn|Ginex|29.4mm|9.6mm|Accuraat, harde klappen|
-|VVN310|3.5Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|3/5 no repeat|
+Volgens QuickLoad is 6gn PF128
-|VVN310|3.6Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|1/5 no repeat|
-|VVN310|3.7Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|Sporadic stovepipes|
+|Lovex D036|6.5gn|AlsaPro FMJ|115gn|Ginex|29.4mm|9.6mm|Accuraat, harde klappen|
+Volgens QuickLoad is 6.4gn PF130
 |VVN310|3.8Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|Excellent|
 |VVN310|3.9Gn|LOS RN|123Gn|Ginex SPP|28mm/1.1"|9.6mm/.378"|Excellent|
+|Lovex D036|4Gn|Ares Green Fullcoat|147Gn|Ginex SPP|28.9mm|9.6mm|Excellent accuracy|
+|Lovex D036|5.6Gn|Los CPRN|115Gn|Ginex SPP|28.9mm|9.6mm|Excellent accuracy|
+==== Tested, but bad ====
 |**Powder**|**Weight**|**Bullit**|**Weight**|**Primer**|**OAL**|**Speed**|**Powerfactor**|**Testresults**|
@@ Line 62: / Line 104: @@
 The starting load was derived from a forum post of someone stating Vihtavuori Oy had emailed them, saying 3.0gn of N310 is a safe starting point, and the experience of fellow shooters using 3.4gn in their CZ's and Glocks. Main goal is as low recoil as possible, retaining enough cycle energy.\\
 \\
-Secondary source: [[http://reloadingmadeeasy.com/forum/index.php?action=printpage;topic=1038.0|the Reloading Made Easy- forums]]\\
 \\
 .4gn start and 3.9gn MAX, 1.122" min COL (28.5mm)